Outdoor Extension Cord – 100 foot – Heavy Duty 12 Gauge

FEATURES:
• 15 AMPS
• 125 Volts
• 1875 Watts
• Grounded
• All-brass, Strategically-located Mixing Valve
• Unique Set-up Design: One person set-up in as little as two minutes
• Yellow
• Super Flexible and durable vinyl insulation from -40 degrees Fahrenheit to 140 degrees Fahrenheit
• Weather and Water Resistant
• Flame Resistant
• Made to meet Osha Requirements Applications: heater, belt sander, circular saw, table saw,air compressors, or any equipment rated equal to or less than 15 amps

Outdoor Extension Cord – 50 foot – Heavy Duty 12 gauge

FEATURES:
• Outdoor Extension Cord
• 50 Foot in Length
• 12 Gauge (extra heavy capacity)
• 15 AMPS
• 125 Volts
• 1875 Watts
• Grounded
• SJTW, Yellow
• Super Flexible and durable vinyl insulation from -40 degrees Fahrenheit to 140 degrees Fahrenheit
• Weather and Water Resistant
• Flame Resistant
• Made to meet Osha Requirements

Applications: heater, belt sander, circular saw, table saw, air compressors, or any equipment rated equal to or less than 15 amps

Nashua #396 Silver Duct Tape (Case)

SOLD BY THE CASE

• Excellent for home and general repair, bundling, patching & mending.
• Emergency tape for automotive breakdown.
• Used for repairing pool liners, garden hoses, auto upholstery, etc.

SPECIFICATIONS:
• Thickness: 10 mils
• Adhesion: 46 oz/inch
• Tensile Strength: 25 lbs/inch
• Maximum Temperature: 200°F

Nashua 300 Silver Duct Tape (Case)

This tape is excellent for general repair, bundling, patching and mending, conformable, excellent adhesion to variety of surfaces, no curl. Versatile polyethylene coated cloth tape. Conforms well to irregular surfaces. Tears straight, hangs straight, curl resistant. Rubber adhesive, polyethylene coated cloth backing.

Available in silver.

Arrow T50 Stapler

SPECIFICATIONS:
• Staple Range: 1/4" to 9/16" & Ceiltile
• Staple Type: Arrow T50FS
• Staple Capacity: 85

FEATURES:
• Chrome finish, all-steel construction.
• High-carbon hardened steel working parts.
• Visual refill window.
• Patented jam-proof mechanism.
• Easy squeeze double leverage operation.

COMMENTS:
The T50 stapler is used by building contractors, do-it-yourselfers and specialty trade applicators for stapling insulating, ceiling tile, window screening, upholstery, carpet padding, fence wire and more.

Arrow T50 Staples 1/4"

Note: These staples come in 80 packs per carton. If you are ordering in bulk, it is easier to ship if your order is in multiple quantities of 80.

Available in 1/4" size

P22 Heavy Duty Stapler Plier Type

• Plier Type Stapler
• All-steel construction
• Hand guide loop
• Cam actuated double leverage
• 2-1/2" throat depth
• Easy-to-get-at mechanism
• Loads (150) Arrow P22 staples only
• Uses 1/4" and 5/16" staples

P22 Heavy Duty Staples 5/16"

Arrow's P22 staples are intended for use with the P22 heavy duty industrial plier type stapler. This model has a leg length of 5/16-inch.

Core Heavy Duty Spray Adhesive

Core all purpose heavy duty spray adhesive. Very quick agressive tack. High strength, water resistant and low odor. Contains no chlorinated solvents. Industrial applications on metal, wood, plastics, fabrics and more. Case of 12.

Grayling Tac Spray Adhesive

12 to a case

Barricade "Danger Asbestos" Banner Tape

Surround and cordon-off danger zones, hazardous locations, or restricted areas with highly visible barricade tapes. Barricade tapes are a quick, temporary, and effective means of sending a warning message to those to keep out. Ideal for crowd and traffic control purposes. The bold message is printed repeatedly along the continuous length of the tape. Tape is lightweight, durable 3-mil polyethylene plastic that is non-adhesive and self-wound tightly on rolls. Material is economical and disposable. Unspool the roll, cut or tear to length the tape, and put it up with adhesive tape, nails, or tie it off. Available in 3" wide x 1000’ rolls.

Grayling 44x60 Glove Bags Extended Run

• 25 bags per roll
• The basic Extended-Run glovebag. This economy model has all the features of the Available line except the entry ports. Enclose pipe diameters up to 8" in runs of 6’ to 91’ of horizontal pipe. Each of the 25 chambers measures 44" x 60" allowing you to cut of as many or as few as you need. One arm set per chamber, stocked in 6 mil, available in 10 mil special order.

Grayling 54x60 Glove Bags Extended Run

• 20 bags per roll
• The basic Extended-Run glovebag. This economy model has all the features of the Available line except the entry ports. Enclose pipe diameters up to 8" in runs of 6’ to 91’ of horizontal pipe. Each of the 25 chambers measures 44" x 60" allowing you to cut of as many or as few as you need. One arm set per chamber, stocked in 6 mil, available in 10 mil special order.

Grayling 60x72 Glove Bags Extended Run

• 20 bags per roll
• The workhorse for extended-runs of large diameter pipe. Encloses pipe diameters up to 14", and can safely contain anywhere from 8’ to 100’ of horizontal pipe. Each of the 20 chambers measure 60" x 72", allowing you to cut off as few or as many as you need. One arm set per chamber, stocked in 6 mil and available in 10 mil special order.

Grayling 72x120 Glove Bags Extended Run

• 10 bags per roll
• The standard, single-use glove bag that revolutionized the industry with labor saving features. Smart design details such as quick attach collars, HEPA/water entry ports, Fiber Guard glove sleeves and arm openings placed so the weight of debris doesn't rest on the worker make these bags the choice of abatement professionals.

Grayling 66x84 Glove Bags Extended Run

• 15 bags per roll
• This revolutionary way to tackle extended runs of pipe insulation dramatically increases productivity and safety by eliminating multiple bag setup time and reducing job site fiber counts. Used in sections up to 25 chambers at a time, professional abatement crews use extended runs for increased speed, efficiency and safety in large scale removal jobs.

Grayling QT10 Quick Twist Glove Bags

• 20 bags per roll
• The most popular, and versatile glovebag in the collection, the QT10 fits pipe diameters up to 10" and removes 42" to 54" of pipe insulation per bag. It handles 40% more insulation than a 4460 style glovebag. This bag replaces the 4460 through 6060 style glovebags.